BusinessHABFood packaging boxes: Paper boxes are easy, environmental friendly crafts that make good gifts, trays, and storage containers. You can make them by folding any size paper into a variety of shapes. They are a useful, fun way to use up flyers and discarded paper. Disposable take out fast food paper container box, takeaway chicken wing box, custom French fries fast food packaging burger box.
Read on: 19 Effective Fast Foods Management Tips
Food packaging boxes
Build something 100 people love, You can request publication of your article for publication by sending it to us via our Email below. Click here to start business now with businesshab.com
1. Choose your paper.
For this method, rectangular paper works best. If you are making a gift or a party favor, use brightly colored and/or patterned paper. If you are simply practicing your paper folding skills, use some scrap paper instead.
2. Fold the paper vertically in half.
If using patterned paper, make sure the pattern is on the outside. Unfold the paper again.
- Make sure each fold is creased well. You can crease the folds with your fingernail, a coin, or some other small, hard object.
- If you’re using cardstock or another kind of thick paper, you can use something called a “scoring tool.” This can be a very dull knife, an empty ballpoint pen, a bone folder, or an embossing tool.
Food packaging boxes
3. Fold each side of the paper to the centre crease.
Take the edge and line it with the centre crease. Once again, the pattern should be on the outside. Unfold the paper. It should now be in quarters sectioned width wise.
4. Fold the entire paper in half lengthwise.
Food packaging boxes
5. Fold each short side to the centre crease.
You are doing the same thing with this new lengthwise centre crease as you did in Step 3.
- This will give the new side four sections. The paper should now have 16 sections in all.
- Do not unfold your paper this time. Keep in folded lengthwise.
Read also: 31 Ways on How to Start a Food Packaging Business
6. Fold each corner.
Line the corners up with the nearest lengthwise crease. The folded corners should each form right triangles with their bases flush with a lengthwise crease. You should end up with an uneven octagon.
- A strip of paper should be between the center creased edges and the edge of the newly folded corner, creating a flap.
7. Fold the flaps from the middle down over the triangles made in the previous step.
This opens the center of the paper so you can see the center crease inside the box.
- This flap will be seen from outside the box. If you are making a gift or decorative box, you might consider using two-sided patterned paper for additional ornamentation.
Food packaging boxes
8. Pull up on the two flaps.
You can grip them by the creases in the middle. You should now have a complete box.
- You may have to re-crease some of the folds to make your box stand more securely.
See also: 27 Tips to Start Fast Food Restaurant Supplies Business
9. Make any finishing touches.
Making an Alternate Rectangular Box
10. Choose your paper.
Food packaging boxes
11. Fold the paper lengthwise in half.
See also: 50 Home Base Food Retailing Business
12. Fold the long sides to the centre crease.
Make sure the pattern is on the inside. Take the outer edges and fold to the centre crease. Unfold the two creases you just made.
- The paper should now have four vertical sections. At this point, the paper is still half folded, so you should only see two of them and no pattern.
Food packaging boxes
13. Fold back the edges lengthwise along the nearest crease.
The paper should now have flaps, with the pattern of the paper visible.
- Each flap should be three layers folded on top of one another in a Z pattern.
- Do not unfold the paper.
14. Flip the paper over and fold the edges to the canter crease.
When the paper is face down, you should see only the centre crease and the two lengthwise edges. Fold the paper towards the middle crease so that it lines up with the two outer creases. Unfold partially so that the outer creases return to edges.
- There should be two lengthwise sections before unfolding and four lengthwise sections after.
15. Fold the bottom left corner to the third crease towards the right.
Line up the bottom outer edge with the crease.
- The new triangular section will have a flap in the middle of it.
Read also: 32 Tips on How to Open Filibertos Mexican food
16. Fold the bottom right corner of the flap to the top edge.
Food packaging boxes
17. Fold the bottom right corner upwards to meet the edge of the flap.
The bottom right corner will be on the other side of the third crease.
- The newly made section will be triangular with a point at the end. The top should have a flap.
18. Insert the newly made section into the flap below.
Lift the newly folded section and carefully slip into the flap on the section beneath it. The flap and the folded triangular corner will be visible.
19. Tuck the pointed tip in.
Take the triangular corner and fold underneath the flap. You may need to re-crease the folds.
- You should have a straight edge along the bottom. The newly folded flap section will be in the shape of a trapezoid. It will sit with its parallel sides flush with a second larger trapezoid.
Food packaging boxes
20. Repeat Steps 6-10 with the opposite end.
It may help to turn the paper 180 degrees before you begin.
- When finished, the two sides should mirror each other. The paper should now be in the shape of an oblong octagon.
See also: 50 Essential Baby Food Makers and What They Can Do
21. Lift each flap.
This should complete the box by creating four standing sides. You may need to reinforce the crease to get the sides to stand better. As with Method 1, you may want to decorate the bed if it’s for a special occasion.
Making a Square Box
22. Choose your paper.
Think about the purpose of the box. If this is a gift or a decorative item, use patterned or colored paper.
- For this particular Method, square paper should be used. Origami paper is ideal for a gift box. Make sure your paper is completely even on each side. Either use square paper, or measure and cut the paper so each side is the same size.
23. Fold the paper in half diagonally, then unfold.
If using patterned paper, make sure the pattern is on the inside. Turn the paper 90 degrees and repeat this step. You should now have four sections.
Food packaging boxes
24. Fold each corner into the centre.
You should start with the paper patterned side down, folding each corner to reveal the pattern side of the paper. The plain side should be covered up now. Your paper should now look like a smaller square made up of four identical triangles.
25. Fold two parallel edges to the centre.
The newly folded sections should be folded down on top of the corner folds you just made in Step 3. The paper should now be a rectangle. When folded completely, you should see only two rectangular flaps that meet at the centre.
Read also: 23 Tips on Food Safety Net Services
26. Fold the shorter edges to the centre.
The folds should be made over the ones created in Step 4. The shape will now be an even smaller square. The only visible pieces at this point should again be two rectangular flaps that meet at the centre.
Food packaging boxes
27. Unfold the paper partially.
Rotate Stop unfolding once you have the square made up of triangles that you made in Step 3. Fold two parallel edges back towards the centre on the already creased fold. There are two sets of edges to choose form, but they are identical. You are not making a new fold. Let them sit vertically, as these will be the beginnings of your box’s sides.
28. Lift the paper by either of the central width wise triangles.
This should partially unfold one shorter end of the rectangle. Don’t use too much force to avoid tearing the paper. You may need to re-crease any edges that aren’t crisp. You should now have three outwards-facing triangles, two of which with a central crease. The base of each triangle forms three sides of the square that will make up the next side of your box.
29. Push the two creased triangles back inward.
Pinch the central creases together to invert the triangles and push them down. Push inward on the creases and line the triangles against the central crease of the new side. The paper should start folding, lifting the new side up.
Food packaging boxes
See also: 50 Ways on Where to Donate Canned Food Near Me
30. Fold the remaining triangle into the box.
This last triangle’s base will be the crease that will create the inner lower edge of this side. After folding in, the last triangle should now be in the bed of the box, creating a square with three other identical triangles.
31. Repeat Steps 7 through 9 with the opposite side.
All four triangles should fit perfectly into the bottom of the box. Your box’s bed will look like the square made up of four triangles in Step 3. If you want the triangles to stay perfectly flat, you may need to tape them down.
Making a Pillow Box
32. Gather your materials.
Unlike the previous boxes discussed, you will need to do some cutting and gluing. Don’t let this intimidate you; pillow boxes are actually the easiest type of paper box to make. It’s best to use cardstock or another type of thicker paper for these boxes. In addition to paper, you’ll need scissors, a ruler, and glue.
- You will also need a scoring tool if you use cardstock.
See also: 21Tips to Eat Real Food, The Happiest Hour NYC
33. Print off a pillow box template.
Find a template you like online. You can pick a minimalist pattern or an elaborate one.
-
- You can even print out a blank template that you can decorate yourself. If you choose to decorate the paper, do so before you start folding. Decorating an already-folded box is both difficult and runs the risk of collapsing it.
- You can also print a blank template directly onto decorative paper.
Food packaging boxes
34. Cut out your template.
Using your scissors, carefully cut along the lines designated by the template. A standard pillow box template has two parallel straight sides and four curved sides. They look similar to a wide hour glass. Some may be more elaborate, but they still tend to keep a “pillow” shape.
See also: Read 20 Tips on What is tcs food
35. Score the fold lines.
For straight fold lines, line your ruler up next to the marked edges on the template to guide you. The curved fold lines will be trickier, since you’ll need to freehand them. Gently run your scoring tool up and down the lines until an indent forms. Don’t be so rough that you cut through the paper.
36. Fold your box in half along the centre fold line.
Food packaging boxes
37. Fold and glue the tab.
Fold the second straight line inward. The skinny flap will be what holds the box together. Flip the box back over and apply glue evenly on the tab.
- To help glue dry faster, start by using a minimal amount of glue, just what is necessary, and make sure you are applying it onto a dry surface with no other moisture.
See also: 101 Top Southern Fast Food Chains
38. Assemble the main part of the box.
Fold the box in half again, decorative sides facing out. Tuck the flap under the far edge of the box. Line up the flap so that its crease is now flush with the far edge. Place your box in a heavy book while the glue dries to seal the edges.X
39. Fold the curved edges inward to finish your box.
Once the glue has dried, gently fold the round scored lines down towards the centre of the box with your fingers. They should now form two parallel sides each shaped like a pointed oval. Because of their concave shape, the edges should hold together without any additional glue. If you used thin paper, though, glue may be necessary.
Food packaging boxes
40. More tips
-
Don’t expect to get it perfect on your first try. It will take practice.
-
If the instructions sound difficult or complicated, don’t worry, it’s not that hard. Keep trying until you get the step, or try again with a fresh sheet of paper.
-
Paper boxes aren’t as sturdy as other boxes. Don’t put heavy objects, fragile items, or liquids in them.
Conclusion:
Browse this vast range of food packaging box and related disposable beverage containers, and you’ll find exactly what you’re looking for. Disposable drinks containers are used extensively in the cafe and takeaway food industry, and other places that offer customers hot and cold drinks. Many offices and other workplaces also offer staff disposable cups for use in communal spaces, for both hot and cold beverages. Built to withstand the heat of tea, coffee or hot chocolate, you can find double walled cups and options that are insulated with corrugated cardboard to keep hot drinks hot for longer. You’ll also find cups that are suitable for ice-cream, frozen yoghurt and soup.
BusinessHAB