17 Strategies to Open 24 hour AC Repair Business near People

24 hour ac repair near me: Air conditioners are essential to keeping your home and business cool during hot weather. Split air conditioners are a common type of cooling system well-known for their compact, ductless format. The inner unit looks like a long rectangle that’s built into a wall of your home, while the outdoor unit, known as a condenser or compressor, looks like a large metal box. Any air conditioner is only as good as its inner workings, so it’s important to examine and clean your split A/C often. Start by accessing and cleaning your indoor A/C unit before you work your way outside to clean the condenser.

Read also: 15 Signs to Get the Best of After hours HVAC Repair Services

24 hour ac repair near me

24 hour ac repair near me: BusinessHAB.com

1. Put a cleaning bag around the entire split A/C system.

Surround your entire appliance with a new cleaning bag to prevent any dust or dirt from reaching the floor. They can be purchased online for under $20.

  • Try to purchase a bag that comes with a cinch, so you can loosen and tighten its circumference.
  • You can use an empty trash bag in lieu of a specialty cleaning bag.

Read on: 15 Tips to Operate 24 hour AC Repair Service

2. Turn off the power source and lift up the front panel.

Go to the appropriate circuit breaker or power source in your home and turn off the power to your split A/C before opening the front panel. Undo the latches on the front part of the A/C to lift it up so you can access the inside of the unit.

  • Most machines have indoor and outdoor components, so make sure that you’re turning off the power to the entire cooling system.

24 hour ac repair near me

3. Remove the air filters from your split A/C.

The long, rectangular pieces that rest at the front of the appliance are the air filters, and they have to be removed and washed to remain in top condition. Press a tab along the side of each air filter to loosen and remove them. Make sure to first shake the filters outside to remove any obvious dust and dirt before you start the cleaning process.

  • If there are no obvious tabs that open the front of your split A/C, check the manufacturer’s guide for help.

4. Rinse the removed air filters under running water.

Take the air filters to a sink or large basin and pour cool tap water over them. If your filters aren’t that dirty, rinsing them might be enough to remove the dust. If running water doesn’t seem to do the trick, use a sponge or cleaning pad to gently rub in a mild cleaning detergent. Then, rinse them off and let them air dry.

  • Wash out your filters at least once every other month.

Read also: 15 Tips to Run a Successful 24 7 AC Repair Business

5. Blow the dust off of the cooling fins.

Add a thin, canister attachment to your air blower and use it to free the dust from the back of your split A/C. The cooling fins look like a series of metallic lines that are snug against the back of the A/C. Make sure that you blow over the entire surface area of the cooling fins.

  • A brush or canister vacuum attachment can also help with this part of the process.

24 hour ac repair near me

6. Clean the coils with no-rinse evaporator spray and let them dry.

Take a specialty can of no-rinse evaporator cleaner and apply it to the coils. Then, let the product sit for at least 20 minutes.  The coils look like connected, rounded pieces of metal, and they can be found running across the center of the indoor unit.

  • You can purchase evaporating cleaners online.

7. Spray antifungal cleaner onto the coils to prevent mold.

Use a can of antifungal cleaning spray to sanitize the back of your air conditioner, where toxins would most likely form. This cleaner helps prevent toxic particles and spores from growing in your appliance. Allow at least 5 minutes for the spray to set before you put the air filters back in.

  • If you’re having trouble finding this spray at a hardware store, check online.

See also: What kind of AC Repair Service can I do on my own?( Get the 20 Tips)

8. Replace the air filters.

Secure the air filters back in their original position once you have confirmed that they are clean and dry. They should glide into place easily, but double-check your owner’s manual if you’re having any difficulties with the assembly process. These freshened air filters will ensure that only clean, cool air makes it through your A/C.

24 hour ac repair near me

9. Clear out any clogs in the A/C by flushing out the drain lines.

Avoid a drain line clog by disconnecting the hose or pipe that separates the indoor and outdoor units. Use a pressurized flush kit to force water or cleaner down the drainpipe. Let the drain line air-dry for at least 1 hour to make sure all of the water or cleaning fluid has evaporated. Reconnect the hose before turning on the A/C.

  • If needed, feel free to flush water or a cleaning agent through the drain line both ways.
  • You can purchase flush kits online that contain a pressurized nozzle.

10. Turn your split A/C back on to make sure everything is working.

Go to the circuit breaker or power source for your A/C and switch the electricity back on. Once the power is up and running, check your split A/C to see if cold air is coming out of it. Enjoy breathing in refreshing and clean air!

  • You can also stick a wire or long piece of metal through the pipe to remove any clogs.
  • If your split A/C is still having issues, consider contacting a professional technician for help.
  • Keep the cleaning bag in place after you turn the A/C on—there’s a good chance that the machine will be spitting out some dirty water. Wait until all of the waste has left the AC before removing and tossing out the bag.

Read also: 11 Tips to Get the Best of HVAC Emergency Repair Services

11. Switch off the power to your outdoor condenser.

Unplug or switch off your outdoor split A/C unit so that no electricity is flowing into it. Since you’ll be rinsing off the fins of the AC with cold water, you definitely don’t want it to be hooked up. Your power system might be hooked up to a breaker, or it could have its own power source—regardless, flip or unplug this source so that the power is completely off.

  • Check your home’s schematics if you don’t know where the power source is. Generally, it can be found a few feet away from the unit outside.

24 hour ac repair near me

12. Use a brush attachment to vacuum the condenser fins.

Hook up a vacuum outside and add the brush attachment to the vacuum’s nozzle. The condenser fins are thin, vertical metal pieces that line the inside of the metal unit. Turn on the vacuum and suck out any visible dust and debris from the outdoor unit using long movements. Go horizontally and vertically in straight lines until no dirt or leaves are visible in your condenser.

  • Rake around your outdoor unit frequently and brush off any stray leaves or pieces of debris that you see.

Read on: 17 Tips to Practice Water Heater Repair Business

13. Straighten the metal fins with a long knife, if necessary.

Take a long dinner knife and slide it through the indentations between any metal fins that seem bent. If you want your condenser to be working at top quality, you want to be sure that all of the fins are straight and functioning properly.

  • You can also purchase specific tools from a home improvement store that are designed to straighten out the A/C condenser fins.

14. Unscrew the lid of the outdoor unit so you can take out the fan.

Use a screwdriver or another pointed tool to detach the grille from the top of the condenser. Before you can clean out the fins, you need to remove any electrical units—specifically, the fan. Use a wrench or screwdriver to remove any bolts or screws securing the fan in place before you lift it out of the metal unit. The fan is wired to the condenser, so you won’t be able to remove it completely.

  • Double check the manufacturer’s guide to confirm the safest way to take out your outdoor condenser fan.

Read also: 12 Tips to Meet Emergency Furnace Repair Needs

15. Rinse the fins with a hose and let the unit dry completely.

Turn on a garden hose and rinse out the A/C condenser fins from the inside of the metal unit. The rinsing process allows the fins to be as clear and clean as possible, so your condenser can run efficiently. Let the inside of the outdoor unit dry completely before you do anything else.

  • Use a sprayer attachment if you want to get a finer or stronger mist from the hose. Try not to apply too much water pressure to the fins.

24 hour ac repair near me

16. Reattach the displaced parts before turning the power back on.

Use the proper tools to secure your fan back into the condenser unit, and use a screwdriver to reconnect the top grille to the outdoor unit. Once all of these pieces are secure, go to the circuit breaker or power source and flip the electricity on again (or plug in the unit).

  • If your outdoor unit seems to be having issues, don’t be afraid to contact a professional for assistance.
  • Check the owner’s manual that came with your A/C if you aren’t sure where certain parts are.

  • A used toothbrush can be very useful in dislodging and scrubbing some of the stubborn spots on the coils and everywhere else, especially areas near the airflow outlet.

  • Before you begin, you can remove the drain plug from the drip tray in your A/C unit to allow all the dirt to drain into the wash bag instead. This can avoid letting too much dirt flow into the drainpipe.

Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like