Oops! It appears that you have disabled your Javascript. In order for you to see this page as it is meant to appear, we ask that you please re-enable your Javascript!

19 Tips to Open Steamfitter Business in Nigeria

Steamfitter Business: Steamfitters perform maintenance and installations on boiler.

Ventilation, heating, and air conditioning systems of all types that contain piping.

Contractors, property management companies, private businesses.

And federal and local governments hire steamfitters.

To work full- and part-time shifts during all hours.

Including weekends and holidays.

As well as on-call emergency hours.

Steamfitter Business

Steamfitter Business: https://www.akbizmag.com

Read also: 29 Tips to Become Sheet Metal Worker in Nigeria

1. Steamfitter Business

Steamfitters often work independently with little supervision.

But ultimately do report to foremen and other managers.

Travel is required for this job.

As steamfitters go to onsite locations.

To install and service piping systems of all types.

2. Steamfitter Duties and Responsibilities 

Job tasks for steamfitters vary based on the hiring company.

Or government providing employment.

And the types of piping systems being serviced and installed.

Which may include residential, industrial.

And commercial systems both big and small.

However, these core duties for steamfitters are essentially the same:

Read on: 39 Tips to Write Hatchery Business Basic Business Plan in Abuja

Steamfitter Business

3. Install and Maintain Piping Systems

Steamfitters install and maintain piping systems, supports, and related materials.

Operate Equipment

Steamfitters test and operate hydraulic and pneumatic equipment.

For heating and cooling systems, as well as other mechanical systems that use piping.

See also: Top 55+Animal Care Practices Tips in Nigeria

Service Pumps

Steamfitters install, replace, and repair pumps that are connected to piping systems.

Make Repairs

Steamfitters repair leaks on piping systems and repair and replace thermostats and valves.

Prepare Pipes

Steamfitters cut and thread pipes to make installations and repairs to systems.

Read on: Top 21 Basic Loan Acquisition Tips in Nigeria

Follow Safety Protocols

Steamfitters follow all safety procedures and standards to maintain a safe work environment. This includes wearing proper safety equipment.

Interpret Plans

Steamfitters read and interpret blueprints, schematics, and drawings for new and existing piping systems.

Inspect Systems

Steamfitters inspect piping systems to troubleshoot problems and determine the repairs needed.

See also:33 Tips to find Right Business Idea in Nigeria

Perform Upgrades

Steamfitters make upgrades to existing piping systems.

By replacing sections of pipes, valves, and other components.

4. Steamfitter Skills and Qualifications 

Steamfitters are detail-oriented professionals.

With a high degree of mechanical aptitude.

Who use their analytical skills.

To make repairs to complicated piping systems of all sorts.

Read also: Top 10 Pest Control Success Tips in Nigeria

Employers only hire steamfitters who display the following essential skills:

  • Math skills – steamfitters use strong math skills to take accurate measurements and correctly match fittings and pipes to each other
  • Problem-solving skills – steamfitters troubleshoot systems and use problem-solving skills to determine the repairs needed and find weakened or broken areas of piping
  • Attention to detail – steamfitters need sharp attention to detail and strong analytical skills to find and repair problems, read blueprints, and design precise installation plans for piping systems
  • Physical stamina – steamfitters work with their hands to install and repair piping systems by crawling, squatting, stooping, stretching, and lifting heavy materials and equipment, which requires physical strength and ability
  • Communication skills – steamfitters use verbal and written communication skills to report to supervisors and relay information about piping systems to customers

See also: 18 Tips to Become Dairy Farming Consultant in Nigeria

Steamfitter Business

5. Tools of the Trade

Steamfitters regularly work with these tools:

  • Measuring tools (tape measures, rulers, squares)
  • Cutting tools (saws, cutting guides)
  • Hand tools (clamps, pliers)
  • Welding tools (torches, welding gauges)

Steamfitter Business

6. Steamfitter Education and Training

Most employers require steamfitters to have a high school diploma.

Or equivalent and be at least 18 years of age.

Though some employers accept candidates as young as 16.

Many employers require steamfitters to complete an apprenticeship program.

Before they can be hired for this position.

Some employers, however, will hire new steamfitters.

In order to train them as apprentices.

Through paid hands-on work experience.

Apprenticeship programs vary by state and by company.

And may last for several years.

See also: 32 Tips to Become Java Architect in Nigeria

7. Steamfitter Salary and Outlook 

The Bureau of Labor Statistics shows that plumbers, pipefitters.

And steamfitters earn $51,450 annually and $24.74 hourly.

These professionals occupied over 450,000 jobs in 2016.

A number that is estimated to grow 16 percent through 2026.

This is much faster than the average U.S. job growth rate.

8. Steamfitter Business Benefit

Full-time steamfitters receive complete benefits packages.

From employers that include health, dental, and vision insurance coverage.

Steamfitters also typically receive workers’ compensation benefits.

As well as paid vacation and sick days.

Some employers offer additional benefits.

Such as wellness programs and continuing education reimbursement.

Read on:15 Tips to Become Fish farming Business Consultant in Nigeria

9. Job Duties and Tasks

1) Assist plumbers by performing rough-ins, repairing and replacing fixtures, and locating and repairing leaking or broken pipes.

2) Cut or drill holes in walls or floors to accommodate the passage of pipes.

3) Measure, cut, thread and assemble new pipe, placing the assembled pipe in hangers or other supports.

4) Mount brackets and hangers on walls and ceilings to hold pipes, and set sleeves or inserts to provide support for pipes.

Steamfitter Business

5) Requisition tools and equipment, select type and size of pipe.

And collect and transport materials and equipment to work site.

6) Fit or assist in fitting valves, couplings, or assemblies to tanks, pumps, or systems, using hand tools.

7) Assist pipefitters in the layout, assembly.

And installation of piping for air, ammonia, gas, and water systems.

8) Excavate and grade ditches, and lay and join pipe for water and sewer service.

Steamfitter Business

9) Cut pipe and lift up to fitters.

10) Disassemble and remove damaged or worn pipe.

11) Clean shop, work area, and machines, using solvent and rags.

Our Career Interest Test will show you which careers match your interests.

Our Free Personality Test will show you which careers match your personality and why.

Read also: 24 Tips to Become Emergency Management Business Consultant in Nigeria

Steamfitter Business

12) Install gas burners to convert furnaces from wood, coal, or oil.

13) Immerse pipe in chemical solution to remove dirt, oil, and scale.

14) Clean and renew steam traps.

15) Fill pipes with sand or resin to prevent distortion, and hold pipes during bending and installation.

10. Work Environment for Steamfitters

Steamfitters hold about 500,300 jobs.

The largest employers of plumbers, pipefitters, and steamfitters are as follows:

Steamfitters work in factories, homes, businesses.

And other places where there are pipes or septic systems.

Plumbers and fitters lift heavy materials, climb ladders, and work in tight spaces.

Some plumbers travel to a variety of worksites every day.

A few work outdoors, even in bad weather.

Steamfitter Business

11. Injuries and Illnesses for  Steamfitters

Steamfitters have one of the highest rates of injuries and illnesses of all occupations.

Cuts from sharp tools, burns from hot pipes and soldering equipment.

And falls from ladders are common injuries.

12. Steamfitter Work Schedules

Most plumbers, pipefitters, and steamfitters work full time.

Including nights and weekends.

They are often on call to handle emergencies.

Self-employed plumbers may be able to set their own schedules.

13.Steamfitter Training

Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship.

Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year.

In the classroom, apprentices learn safety.

Local plumbing codes and regulations, and blueprint reading.

They also study mathematics, applied physics, and chemistry.

Apprenticeship programs are offered by unions and businesses.

14.Steamfitter Business

Although most workers enter apprenticeships directly, some start out as helpers.

The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.

After completing an apprenticeship program.

Steamfitters are considered to be journey workers.

Qualifying them to perform duties on their own.

Plumbers with several years of plumbing experience may earn master status by passing an exam.

Some states require a business to employ a master plumber.

In order to obtain a plumbing contractor’s license.

15. Licenses, Certifications, and Registrations for Steamfitters

Most states and localities require plumbers to be licensed.

Although licensing requirements vary.

Most states and localities require workers to have 2 to 5 years of experience.

And to pass an exam that shows their knowledge of the trade.

And of local plumbing codes before they are permitted to work independently.

In addition, most employers require plumbers to have a driver’s license.

Some states require pipefitters to be licensed.

They may even require a special license to work on gas lines.

Licensing typically requires an exam, work experience, or both.

Contact your state’s licensing board for more information.

16.Important Qualities for Steamfitters

Communication skills. Plumbers must be able to direct workers, bid on jobs, and plan work schedules.

Plumbers talk to customers on a regular basis and need to understand and communicate problems and directions.

Dexterity. Plumbers must be able to maneuver parts and tools precisely, often in tight spaces.

Mechanical skills. Steamfitters use a variety of tools to assemble and repair pipe systems.

Choosing the right tool and successfully installing, repairing, or maintaining a system is crucial to their work.

Physical strength. Steamfitters must be strong enough to lift and move heavy tools and materials.

Troubleshooting skills. Steamfitters find, diagnose, and repair problems.

For example, pipefitters must be able to perform pressure tests to pinpoint the location of a leak.

17. Job Outlook for  Steamfitters

Employment of steamfitters is projected to grow 14 percent over the next ten years.

Much faster than the average for all occupations.

Most demand for plumbers will stem from new construction.

And the need to maintain and repair plumbing systems.

In existing residences and other buildings.

Employment of sprinklerfitters is expected to increase.

As states continue to adopt changes to building codes that require the use of fire suppression systems.

18. Job Prospects for Steamfitters

Overall job opportunities are expected to be good, and many  steamfitters.

Will be needed to replace those who are expected to retire over the next 10 years.

Workers with knowledge of Building Information Modeling (BIM).

Should have the best job opportunities as integrated building-planning abilities increase in demand.

19. Steamfitter Business

As with other construction workers.

Employment of  steamfitters is sensitive to fluctuations in the economy.

On the one hand, workers may experience periods of unemployment.

When the overall level of construction falls.

On the other hand, shortages of workers may occur.

In some areas during peak periods of building activity.

However, maintenance and repair of plumbing and pipe systems.

Must continue even during economic downturns.

So plumbers and fitters outside of construction tend to have more stable employment.

Conclusion

Although most plumbers, pipefitters, and steamfitters.

Learn on the job through an apprenticeship.

Some start out by attending a technical school.

Most states and localities require plumbers to be licensed.

Plumbers, pipefitters, and steamfitters install.

And repair pipes that carry liquids or gases to and in businesses, homes, and factories.


Copyright Warning!

We work really hard and put a lot of effort and resources into our content, providing our readers with plagiarism-free articles, original and high-quality texts. Contents on this website may not be copied, republished, reproduced, redistributed either in whole or in part without due permission or acknowledgement. Proper acknowledgement include, but not limited to (a) Proper referencing in the case of usage in research, magazine, brochure, or academic purposes, (b)"FAIR USE" in the case of re-publication on online media. About possible consequences you can read here: What are the consequences of copyright infringement? BusinessHAB.com is a property of GotoSchool Limited and we have all legal actions at our disposal to take within and outside the internet in effort to protect our intellectual properties. All contents are protected by the Digital Millennium Copyright Act 1996 (DMCA).

Tags: , , , , , , ,

Leave a Reply

Your email address will not be published. Required fields are marked *