Tips to Start Electric Heating Installation Business in Nigeria

Tips to Start Electric Heating Installation Business in Nigeria

Start Electric Heating Installation Business in Nigeria | Find here our tips to properly install a heater in your room to ensure efficient and long-lasting service.

Having a dependable and efficient heating system in your home or business is of utmost importance for a variety of reasons. Heating systems do more than simply keep us warm during the winter months; they also heat our water for bathing and taking care of other essential tasks. If you are considering an upgrade or installation of a new heating system electric heating is the way to go, taking care of its tasks with efficiency and saving you money in the long run.

ELECTRIC HEATING, ELECTRIC HEATERS, AND ELECTRIC CENTRAL HEATING

There are three types of general heating options available when it comes to electric heating installation services. The details of each, and the installations needs and process which accompany each, are detailed below.

ELECTRIC CENTRAL HEATING

Electric central heating is a form of heating which heats each room of the home or building with one main, or central, unit. The ductwork in the structure guides the electric heat throughout the building and into each room, evenly dispersing the heat. If you desire a specific room not be heated you simply close off the vents to that room.

Electric central heating can be efficient and save you money because you can program the heat to disperse at certain times of the day specified by you. This makes tailoring your electric heat use easy and allows you to control your cash flow a bit better. Initial installation costs and the cost of the electric heating unit itself may seem a bit costly, but with regular maintenance and upkeep the unit will indeed pay for itself and give you years of quality service. Have your electric central heating installation and sales company direct you as to the best deal for you and your needs.

BASIC ELECTRIC HEAT & ELECTRIC HEATER USE AND INSTALLATION

ELECTRIC HEAT

Your basic electric heating system is rarely used, simple to install, and while the installation process and products involved may be less expensive than those of electric central heating, these units can consume more power in the end because you must keep the heat for each room concentrated within the room to avoid energy waste. The good thing about this type of electric heating is if you tend to spend a majority of your time in only a couple of rooms during the winter months you can easily shut off the heat in the unused rooms, cutting back greatly on cost. Installation is more tedious than difficult, and maintenance is simple as well, just be sure to have any heating system, including your basic electric heating system, inspected regularly.

ELECTRIC HEATERS Image result for Start Electric Heating Installation Business

Electric heaters, also known as “space heaters”, are lone units which are powered simply plugging into an electrical outlet. They are lightweight, the heat level is adjustable, and they are convenient when you are really trying to save on the heating bill. Installation can be done by you, as these electric heaters are typically portable, but beware! Never leave one of these units running unattended, and never sit them in close proximity to anything which could catch fire. You also want to be sure they are sitting firmly in place, not wobbling or demonstrating any unsteadiness. While these units come with a safety mechanism which will shut them off if they tip over this does not always work. The best option is to turn it off when you are not able to be in the room with the unit running.

ELECTRIC WATER HEATINGImage result for Start Electric Heating Installation Business

Electric water heating and water heaters are a great way to efficiently heat the water in your home or business. There are wonderful water heating units available which place a high priority on saving energy and have taken steps in the units design to ensure savings and efficiency. Installation must be done by a professional, including one proficient in plumbing, and regular inspections and maintenance are a must since you are dealing with an electrical appliance which holds water. Don’t attempt to install it yourself!

You can have the efficient electric heating system you want and you can save money in the long run by taking advantage of all the advances in these electric heating appliances.

To install an electric heating appliance is easy, provided that you possess some handiwork skills! It is far easier to install than a central heating system. It can be done without problem by following a simple procedure.

THE RIGHT LOCATION

Finding the right location, in each room, is the starting point for an optimum functioning, especially for appliances that are electronically controlled. The functioning must not be disrupted by air draughts. It is better to avoid the installation under windows of mediocre quality, at the entrance of a room or in any zone with air draughts that could disturb the temperature control. Otherwise, except in the bathroom, where you must comply with the current electrical safety regulations, it is possible to install them on every wall… Provided of course that a dedicated power supply is available.

USERS PROTECTION AND APPLIANCE SAFE OPERATING

Electric appliances’ protection level against splashing water is defined by their IP index which defines the safe installation areas for electric appliances when close to water draining points.

Atlantic appliances have a high IP index up to IP 24 and can be installed in areas 2 or 3 of your bathroom depending on country regulation.

Atlantic products IP index guarantees safe operation.

Start Electric Heating Installation Business in Nigeria

FIXING AND HANGING

Once the nature of the support is identified (solid, hollow, plasterboard), choose an adapted drill and pegs. Then, mark the points based on the fixing dimensions of the appliance, in order to place it at least 15 cm above the floor. You will find all the necessary information and assembling diagrams in the leaflet. When you are certain of your marks, drill, place the pegs and fasten. Depending on the appliances, they will be fitted with fixing brackets or hooks. Then, connect the appliance to the socket. Lastly, hang the heater to the mural fixings. As an option, some appliances can be fitted with a standing kit.

ELECTRICAL CONNECTION

If you have doubts, it is highly recommended calling a professional installer. In any case, for your safety, switch off immediately the main power supply! Then, refer to the installation manual supplied with your appliance. The connection must be carried while respecting the voltage and the conventional color code for wiring indicated on the information plate: neutral (blue) and phase (brown or red in general). The black wire is to be used if you want a centralized programming and if your home is equipped with pilot wires. All Atlantic appliances are fitted with dual electric insulation and do not need to be grounded (green/yellow wire).


Copyright Warning!

We work really hard and put a lot of effort and resources into our content, providing our readers with plagiarism-free articles, original and high-quality texts. Contents on this website may not be copied, republished, reproduced, redistributed either in whole or in part without due permission or acknowledgement. Proper acknowledgement include, but not limited to (a) Proper referencing in the case of usage in research, magazine, brochure, or academic purposes, (b)"FAIR USE" in the case of re-publication on online media. About possible consequences you can read here: What are the consequences of copyright infringement? BusinessHAB.com is a property of GotoSchool Limited and we have all legal actions at our disposal to take within and outside the internet in effort to protect our intellectual properties. All contents are protected by the Digital Millennium Copyright Act 1996 (DMCA).

Tags: ,

Leave a Reply

Your email address will not be published. Required fields are marked *